20 November 2026

Image to 3D: we tested 6 AI tools with 1 photo

With AI you can turn a product image into a 3D model in a few minutes. We tested 6 tools with the same photo of a stool and put every model next to the photo. For each tool you see what the model looks like, what it costs and whether you can put it on your product page.

Top: the photo, TRELLIS and Hunyuan3D. Bottom: Meshy, Tripo and Claude Code with Blender.
Top row: the photo of a wooden swivel stool, the TRELLIS model and the Hunyuan3D model. Bottom row: the models from Meshy, Tripo and Claude Code with Blender

Top: the photo, TRELLIS and Hunyuan3D. Bottom: Meshy, Tripo and Claude Code with Blender.

How we tested

We took 1 photo of a wood and metal swivel stool. The stool adjusts in height from 47 to 63 cm. In the test we used 60 cm. For AI it's a hard product. The legs are thin, it has 2 materials and the lever under the seat is barely visible in the photo. The underside isn't in the photo at all, so the AI has to make it up.

Every tool got the same photo with its default settings. The first result counted. Then we put every model in the same studio, with the same light, next to the photo. That wasn't possible for Meshy and Tripo, because you can't download from them without a plan. We judged those in their own viewer.

For each model we looked at 5 things that matter on a product page.

  • Is the shape right, including the back and underside?
  • Is the colour of the wood right? We measured it rather than guessed.
  • Does the model have a real size? For AR the stool has to be 60 cm tall in your room.
  • How heavy is the file? That decides how fast it loads on a phone.
  • What does it cost to actually use the model?
The photo every tool got.
Product photo of a wooden swivel stool with metal leg sleeves on a white background

The photo every tool got.

The results side by side

ToolFree downloadWaiting timeTrianglesReal size
TRELLISYes20 sec7,626No, 1 m
Hunyuan3DYes, 1 a day2 min40,000No, 55 cm
MeshyNo2 min233,476Unknown
TripoNo4 min1,886,747Unknown
Claude + BlenderYes10 min11,968Yes, 60 cm
Copilot chatYes1 min200Yes, but lies on its side

Triangles are the small flat faces a 3D model is made of. The more there are, the heavier the file. For a product page, up to about 100,000 is a good limit. Our article on 3D file formats explains more.

TRELLIS: free and fast, but dull

TRELLIS is an open AI model from Microsoft. You can use it free on Hugging Face, a site where AI makers let people try their models. No account needed. Within 20 seconds TRELLIS had a model you can download straight away as a GLB file.

The shape is mostly right. But the model only has colour, no shine, so wood and metal look equally dull. The seat is a wedge with a sharp edge. A rod hangs between the hub and the stretchers that isn't in the photo. And the stool is exactly 1 metre tall. TRELLIS makes every model 1 metre big, whatever the product is.

From the front
The TRELLIS model from the front: a wedge-shaped seat and black rods

From the front

From below
The TRELLIS model from below, with a rod that isn't in the photo

From below

Hunyuan3D: rough and with the floor attached

Hunyuan3D is Tencent's open AI model, also free on Hugging Face. A free account gets a few minutes of compute a day. A model with colour takes almost 5. So our first attempt failed; on the second day it worked in 2 minutes.

At first glance the stool looks fuller than the TRELLIS one, with shine on the wood. Up close, little of it is right. The legs are too short, so the stool looks squat. The metal part between the seat and the hub is too short, so they almost touch. The surface is grainy, as if you're looking at a photo that's too small. Hunyuan also took the floor from the photo along as a grey slab under the stool. The ring of rods between the legs is missing.

From the front
The Hunyuan3D model from the front: short legs, a short spindle and a grainy surface, on a grey floor slab that is part of the model

From the front

From below
The Hunyuan3D model from below: the ring of rods between the legs is missing

From below

When we uploaded the file, our viewer rejected it. The colour images were stored in an unusual way. After 1 conversion it worked, but without knowing 3D files you'd get stuck here.

Meshy: the best-looking model, but downloading costs money

Meshy is a paid service with a free account of 100 credits. A model with colour costs 30 and is ready in 2 minutes. Meshy made the best-looking model of the test. Wood and metal are clearly separate and its wood colour came closest to the photo. Meshy did invent a thread on the spindle, which is smooth in the photo.

With a free account you can view the model but not download it. That needs a plan from €19 a month. You can also log in 5 days in a row for 1 free download. Free models are also licensed CC BY 4.0, so you have to credit Meshy. At 233,476 triangles the model is on the heavy side too.

From the front, in Meshy's viewer
The Meshy model in Meshy's viewer, with wooden legs, metal sleeves and an invented thread on the spindle

From the front, in Meshy's viewer

Tripo: the most detail, far too heavy

Tripo made the most detailed model. You can see the wood grain, the screws in the hub and the lever under the seat. Even the underside, which isn't in the photo, looks believable. It took 4 minutes and 55 of the 200 free credits.

Here too a free account can't export. A plan starts at €12 a month if you pay yearly. Commercial use only comes with a paid plan. The model has almost 1.9 million triangles, nearly 20 times the 100,000 we keep as the limit for a product page. You'd have to simplify it a lot before it loads on a phone.

From the front, in Tripo's viewer
The Tripo model from the front, with wood grain, screws and the lever

From the front, in Tripo's viewer

From below, in Tripo's viewer
The Tripo model from below, with the lever under the seat

From below, in Tripo's viewer

Claude with Blender: the right size, less detail

Claude doesn't guess a model from a photo but builds it part by part in 3D software such as Blender. You tell it how big the product is. That size is exactly right afterwards. None of the other tools can do that.

The result is light and clean, but less detailed than Tripo. What went well and where you get stuck is in our test with Claude in Blender and SketchUp.

From the front
The Claude Code model in Blender from the front, with metal sleeves and a ring of rods

From the front

From below
The Claude Code model in Blender from below, with the ring of rods

From below

Copilot chat: the right size, but the stool lies down

In the regular Copilot chat you can also ask for a GLB. Copilot then writes code that builds the stool from rods and discs. The size was right, because we gave it. But the model lies on its side and is white. Even after 2 extra rounds no real materials were added. Read everything about this test in our article on 3D in Copilot chat.

Copilot 3D is gone

Microsoft's Copilot 3D also turned a photo into a 3D model. It came out in August 2025 and Microsoft shut it down a year later. What that means if you still have models from it is in our article on Copilot 3D.

Turn the models yourself

The models you can download for free are in our viewer. Spin them around and look especially at the underside and the rods between the legs.

TRELLIS
Hunyuan3D
Claude Code with Blender

What AI can't do yet

After this test we see 4 things no tool gets right.

Size
A GLB file works in metres. That is how a phone places the model in AR, where visitors see the product in their own room. TRELLIS turned the 60 cm stool into a 1 metre stool. Hunyuan3D happened to come close at 55 cm, but put a 2 by 2 metre floor slab under it. We couldn't check Meshy and Tripo, because you can't download without a plan. Only Claude in Blender got the size right, because our request said 60 cm. TRELLIS and Hunyuan3D have nowhere to enter a size. Meshy only offers it when downloading, with a plan.
Hidden sides
Whatever isn't in the photo, the AI fills in itself. For the stool that went reasonably well: the underside looks like most stools do. If the back of your product has something that isn't in the photo, such as a socket, a label or a button, it's missing from the model. Or the AI draws something else there. Visitors then see a product that looks different in real life. So always turn the model all the way around and compare it with your real product.
File weight
The best-looking models are the heaviest. We couldn't measure the size of the Tripo file, because downloading costs money. With almost 2 million triangles the shape alone is about 50 MB, uncompressed and without the images for colour and material. For comparison: the TRELLIS model was 1.4 MB and the Claude one 1 MB. A 50 MB file loads slowly on a phone or not at all.
Free
Free often means free to try. Downloading and commercial use need a plan at Meshy and Tripo. The free tools on Hugging Face give you a few attempts a day.

Tips if you try it yourself

If you want to try it yourself, start with TRELLIS. It is free and needs no account. You get a file straight away. These tips help with every tool.

  • 1 product in the photo, nothing else around it.
  • A calm, plain background.
  • The whole product in frame, nothing cut off.
  • Shot at an angle from the front and slightly above, so the AI sees more of the product.
  • Turn the model all the way around before you use it. Look at the underside in particular.

Our verdict

AI makes a recognisable 3D model from 1 photo in a few minutes. That's enough to show what 3D does on your product page. For a simple product it can do the job too. TRELLIS is the easiest place to start.

For a product page where visitors buy on what they see, none of the models is ready. The size is missing, details are made up or the files are too heavy. Expect touch-ups. At Meshy and Tripo you need a plan on top.

Need the model to be exactly right, in size, colour and material? Then we make it, from €50 per model. You get a light file that works with AR straight away.

Your model on your product page

Have a GLB file, from an AI tool or a 3D designer? Upload it to Portal and you get an embed code for your product page, with AR on phones. Your first model is free.